Infills: 20%, 40%, 60%, 80%, 100%

PC-ABS combines the exceptional strength and heat resistance of PC with the flexibility of ABS.

About PC-ABS

PC-ABS is a thermoplastic blend that combines the properties of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS). It is commonly used as a filament for FDM (Fused Deposition Modeling) 3D printing.

Material Details

PC-ABS offers a combination of desirable characteristics from both polycarbonate and ABS plastics. By blending these two materials, PC-ABS exhibits excellent strength, high toughness, heat resistance, and good flexural strength.

PC-ABS is an ideal choice when you require the strength of polycarbonate and the impact resistance of ABS. It is suitable for a range of applications, including prototyping, tooling, and low-volume production.

Technical Properties

Technical propertiesValue
Tensile strength45 - 70 MPa
Tensile modulus1700 - 2400 MPa
Tensile elongation5 - 20%
Flexural strength60 - 85 MPa
Flexural modulus1700 - 2300 MPa
HDT (0.45 MPa)90 - 110°C
HDT (1.8 MPa)80 - 100°C

The provided technical properties represent the typical range for PC-ABS. However, it's important to note that these properties can vary depending on the specific formulation and manufacturer.




Strong, Heat resistant, Functional

Scroll to Top